One event that can happen at any time is bloodstaining in the home. Learn how to remove these nasty stains from carpets and furniture.
Did you get rid of the unwanted blood stains? If it hasn’t happened to you yet, you will most likely face it at some point. This fact is more common than it seems.
Know the methods and techniques to eliminate them. It can be very valuable and useful to consider it in case you need it at any time. Read on and find out how to do it with simple and practical steps.
Bloodstains on furniture and sofas
If there are bloodstains on your chair, furniture, or a sofa cushion, follow the recommendations released by the University of Illinois. Proceed to mix 1 tablespoon of the liquid dishwasher with 2 cups of cold water. Then moisten a cloth with this mixture and wipe the stain until it absorbs the liquid, but do not rub it.
If the stain does not disappear in this step, repeat the process as many times as necessary until it is removed. Once it disappears, wipe it with a damp sponge with cold water and let it dry.
If the furniture is made of leather, mix mild soap in cold water, shake and create a lather. Then apply with a sponge on the stain. Proceed to rub, taking care not to spread it. Afterward, dry with a clean cloth.
For synthetic fiber furniture
In this case, mix one-part glycerin with one part dishwasher, a few drops of ammonia, and 8 parts cold water. Then moisten a cloth in the previous mixture and cover the bloodstain. Press gently until all is absorbed.
Repeat the process as many times as necessary until it disappears. After this, rinse well and let it dry in the open air. Try to remove all traces of ammonia.
Remember that toxic products have to be out of children’s reach, and use rubber gloves to handle them. Also, keep adequate ventilation.
Remove blood from fabrics
If a cloth protector or blanket covers your furniture, run the stained canvas through a stream or moisten it with cold water. This helps to remove as much of the blood as possible before going through the other steps.
In case the blood is dry, scrape it off with a knife. Then proceed to mix ½ liter of warm water with ½ teaspoon of liquid dish soap and 1 teaspoon of ammonia. Let the fabric soak in this mixture for about 15 minutes, rubbing the back where the stain is if possible.
Put the same mixture back on the stained fabric for about 15 more minutes. After this new soaking process, rinse with enough water. If the stain is very old, it may take 1 hour or more. Finally, wash the fabric and let it air dry.
Stains on upholstery
To remove blood from upholstery:
- Proceed to mix 1 tablespoon of the liquid dishwasher with 2 cups of cold water.
- Rub the stain with a clean cloth impregnated with the previous mixture and pat dry until the liquid is completely absorbed.
- Repeat the steps above until the stain is gone.
Bloodstains on carpets
If you find bloodstains on your carpet, try to act as soon as possible to remove them permanently. If the carpet is made of leather, consider the following actions:
- Remove excess blood by applying light pressure with a soft, dry cloth.
- Then rub a cloth impregnated with a mild detergent and a few drops of ammonia.
- Proceed to rinse with a cloth dampened in cold water until the stain disappears
- Let it air dry.
In case the carpet is made of synthetic fiber, consider the following aspects:
- Mix 1 teaspoon of mild detergent with ½ cup of cold water.
- Spread this mixture directly or with a wet cloth on the stain.
- Rub until the stain is gone, and dry the excess liquid.
If the stain persists, mix 1 tablespoon of ammonia with ½ cup of water. Apply a cloth moistened with the previous substance on the stained carpet and rub until it disappears. Remove any remaining liquid and air dry.
Dried blood stains
If the carpet has traces of dried blood, use a blunt knife, and brush the stain to remove it. Then apply an odorless, flavorless meat tenderizer mixed with a similar amount of water, as this compound can reduce protein, making it easier to remove.
Leave the paste on for 15 to 30 minutes and pat it dry with a clean towel. As a next step, mix liquid detergent with cold water and rinse the affected area.
Another practice is to moisten the dried blood with hydrogen peroxide at a maximum concentration of 3%. Then let it dry until it disappears. In this case, no rinsing is necessary.
To remove fresh blood from carpets, follow these steps:
- Press the blood stain with a clean cloth to remove as much of the blood as possible with light strokes. Try to do it from the edge towards the center and not rub it to spread it even more.
- Spray cold water until damp but not soggy.
- Allow moisture to absorb and towel dry, pressing on the blood.
- Keep drying and wetting until the stain fades. This is repeated as many times as necessary.
In case the stain does not disappear, use a salt paste. To do this:
- Mix salt with cold water until you get a paste.
- Put this paste on the stain and leave it for a few minutes.
- Proceed to dry with a clean towel.
- Repeat as much as necessary.
You must consider vacuuming the carpet if you apply the salt paste with cold water, as it can damage the fibers over time. Another method is to mix 1 to 2 teaspoons of the liquid dishwasher with 1 cup of cold water to wet a cloth with this mixture and apply to the stained area.
In case the stain does not come out, try using shampoo and then ammonia. To do this, mix the shampoo or dishwasher with 1 cup of water and spray it on the stain and let it act for about 5 minutes. Then make a mixture containing 1 tablespoon of household ammonia with a cup of water at room temperature.
For all these methods, brush or vacuum the carpet once it is dry, as this allows to restore the fibers. Try to air dry, where there is good air circulation, or use an electric fan.
Consider treating blood stains once they appear is the most effective way to remove them. For this, it is better to do it as soon as possible. Also, note that it is very difficult to eradicate once it has been washed and dried. Keep in mind, in the same way, that cold water works better.